Primers

Our primers are formulated to provide maximum adhesion of polyurethane foam and coatings to various substrates. They provide short-term protection from the elements and create an excellent surface for bonding of polyurethane foam and/or coatings. Surfaces in which a primer is going to be applied must be clean, dry and free of any foreign material such as grease, oil, water, dirt, etc.

  1. Ultra-Bond 10: Acrylic Emulsion Primer

    • May be applied to BUR roofing, concrete, plywood and some metallic surfaces
    • Can be applied using airless spray equipment
    • Single component product

  2. Ultra-Bond 15: Polyamide Epoxy Primer

    • May be applied directly to bare, properly prepared steel, usually in a three-coat primer/topcoat system
    • Also use over zinc-rich primers, either as finish coats, or as a barrier coat for conventional finishes
    • Used for severe service and marine exposures, also for sustained immersion
    • Can be applied using airless spray equipment, brush, or roller
    • Two component product

  3. Ultra-Bond 16: Clear Acrylic Primer

    • May be applied to BUR roofing, concrete, plywood and some metallic surfaces
    • Can be applied using airless spray equipment
    • Single component product

  4. Ultra-Bond 20: Vinyl Wash Primer

    • May be applied to metal as an etching pretreatment primer
    • Serves as a tie coat over ferrous and non-ferrous metals
    • Can be applied using conventional and airless spray equipment
    • Two component product

  5. Ultra-Bond 55: Modified Alkyd Metal Primer

    • High-solids red oxide alkyd metal primer for steel surfaces
    • Protects steel from atmospheric corrosion
    • Surface should be blasted prior to application to achieve maximum performance
    • Can be applied using airless spray equipment, brush, or roller
    • Single component product