OUR CUSTOMERS
Our primers are formulated to provide maximum adhesion of polyurethane foam and coatings to various substrates. They provide short-term protection from the elements and create an excellent surface for bonding of polyurethane foam and/or coatings. Surfaces in which a primer is going to be applied must be clean, dry and free of any foreign material such as grease, oil, water, dirt, etc.
Ultra-Bond 10: Acrylic Emulsion Primer
May be applied to BUR roofing, concrete, plywood and some metallic surfaces
Can be applied using airless spray equipment
Single component product
Ultra-Bond 15: Polyamide Epoxy Primer
May be applied directly to bare, properly prepared steel, usually in a three-coat primer/topcoat system
Also use over zinc-rich primers, either as finish coats, or as a barrier coat for conventional finishes
Used for severe service and marine exposures, also for sustained immersion
Can be applied using airless spray equipment, brush, or roller
Two component product
Ultra-Bond 16: Clear Acrylic Primer
May be applied to BUR roofing, concrete, plywood and some metallic surfaces
Can be applied using airless spray equipment
Single component product
Ultra-Bond 20: Vinyl Wash Primer
May be applied to metal as an etching pretreatment primer
Serves as a tie coat over ferrous and non-ferrous metals
Can be applied using conventional and airless spray equipment
Two component product
Ultra-Bond 55: Modified Alkyd Metal Primer
High-solids red oxide alkyd metal primer for steel surfaces
Protects steel from atmospheric corrosion
Surface should be blasted prior to application to achieve maximum performance
Can be applied using airless spray equipment, brush, or roller
Single component product