Roof Spray Foam
Ultra-Thane 230 is a closed-cell, spray polyurethane foam roofing designed as insulation and weatherproofing system for low slope, pitched, and barrel configured roofs. Ultra-Thane 230 is 2.5 pcf, 2.7 pcf, or 3.0 pcf exterior, spray foam used for new roof, recover, and maintenance & repair solutions. Our roof foams are manufactured in either low GWP HFO or traditional HFC-245fa technology with best-in-class R-Value performance. Ultra-Thane 230 spray foam with appropriate roof coatings may be installed as a monolithic barrier against water, air, and moisture vapor instrusion over commercial, industrial, institutional, cold storage, and residential roofs.
Ultra-Thane 230 is a plural component, roof foam that provides a seamless, fully adhered, and self-flashing around penetrations, over joints, encloses fasteners and builds cants away from verticals. Our roof foam is a field applied, monolithic membrane, which allows the applicator to build positive slope, enhance drainage and eliminate ponding. Ultra-Thane 230 can be installed over primed metal, BUR, structural concrete, plywood / OSB, densdeck, polyiso, existing spray foam, and many fully adhered & primed membranes.
Ultra-Thane 230 meets Underwriters Laboratory (UL 790) fire classification and under Intertek (CCRR) code compliant, research report for Class A (non-combustible) and Class B (combustible) coated roof system with various slope, deck type, protection board, and coating system approvals. Ultra-Thane 230 is compliant with ASTM C-1029, Florida Building Code, Texas Dept of Insurance, SCAQMD, and California CEC when using our Ultra-Flex, Ultra-Guard, Ultra-Shield, or Ultra-Tuff roof coatings. GCMC warranted coated foam roof systems are available for 10 year, 15 year, and 20 year performance on fully compliant roofs using approved applicators.
Ultra-Thane Spray Foam Roof Features
- HFO Technology
- Densities: 2.5lb, 2.7lb, and 3lb
- 4 reactivity grades
- Superior Yield
- Easy to apply
Ultra-Thane Spray Foam Roof Benefits
- Enviromentally Friendly and state law compliant
- Meets durability and strength requirements
- Enhances installation window and improves foam profile
- Provides opportunity for lowest installed cost
- Higher applicator satisfaction and reduces job downtime
Available Products
Ultra-Thane
230
HFO
ULTRA-THANE 230 HFO ROOFING is a closed-cell, two-component, spray-in-place, rigid monolithic, exterior spray, polyurethane foam that bonds to traditional roof substrates. Ultra-Thane 230 HFO Roofing Foam creates a seamless waterproof barrier which can be installed in additional thickness to create a positive slope to drain on flat roofs.
Ultra-Thane 230 HFO Roofing Foam is a fluid applied, fully adhered membrane, providing superior performance in minimizing heat transfer, condensation and air leakage. Ultra-Thane 230 HFO Roofing Foam is based on Low GWP hydrofluro-olefin (HFO) Technology to expand the polyurethane polymer into a cellular insulation.