Pour Foam - General Coatings Manufacturing Corp.

Pour Foam

Pour-in-place systems are two-component, closed cell, polyurethane foams specifically designed to fill open voids or insulate articles. Ultra Thane Pour Foams can be hand mixed or machine installed to dispense slow rising and expanding polymer into cavities of all shapes and sizes with minimal fill points. With excellent adhesive properties, our pour foams provide durable and well insulated performance with air-sealing capabilities and high resistance to water absorption. As a forward-thinking company, we also manufacture Ultra-Thane 200 pour foam with low GWP potential hydro-fluoro olefins (HFOs) chemistry.

Ultra-Thane pours foam can be used in a variety of industrial, marine, and military applications. These include repairing boat decks, flotation foam for boats, filling vessel hulls, filling mine shafts and abandoned wells, and poured it into wall spaces or into forms to make insulation panels.

Ultra-Thane Pour Foam Features

  • HFO chemistry
  • Lightweight insulation
  • Low viscosity and slower reaction time
  • Strong adhesion to most substrates

Ultra-Thane Pour Foam Benefits

  • Enviromentally friendly solution with low GWP potential
  • High yielding and tough closed cell foam
  • More working time for easier installation
  • Holds 2-piece articles together better
 

Available Products

HFC Pour Foam

Ultra-Thane

170

Ultra-Thane 170 is a two-component, non fire-rated, pour-in-place, polyurethane foam system with nominal core density 2.0 – 2.2 pcf. It is suitable for injection applications to fill cavities for reinforcement or insulation using traditional HFC blowing agent chemistry.

View Products
HFO Pour Foam

Ultra-Thane

200

Ultra-Thane 200 is a two-component, non fire-rated, pour-in-place, polyurethane foam system with nominal core density of 2.0 - 2.3 pcf. It is suitable for injection applications to fill cavities for reinforcement or insulation using low GWP HFO blowing agent chemistry.

View Products