Primers
Ultra-bond primers can provide many benefits including proper bonding to the primary substrate, asphalt bleed blocking, moisture drive blocking, rust inhabiting, or enhance solar gain on colder substrates. Applying Ultra-Bond primer can improve spray foam performance over a wide range of temperatures and roof deck conditions.
Ultra-Bond primers may be used on virtually any substrate to improve adhesion of foam or coatings and, in some cases, to seal the substrate as an additional benefit. Surfaces that require primer include structural concrete, block masonry, gypsum protection board, existing spray foam, galvanized or ferrous metal, BUR, plywood, roofing coatings and single-ply membranes.
Ultra-Bond Features
Ultra-Bond Benefits
Available Products
GC
Ultra-Bond
10
GC ULTRA-BOND 10 is a waterborne modified acrylic neoprene asphalt primer specifically designed as a substrate primer before the application of spray polyurethane foam.
View ProductsGC
Ultra-Bond
16
A clear water-based modified acrylic primer specifically designed to provide maximum adhesion over acrylic coated spray foam.
View ProductsGC
Ultra-Bond
12
Low viscosity, pre-treat for black EPDM roofs prior to power washing and applying roof coatings.
View ProductsGC
Ultra-Bond
U
Two-component (1:1), high-solids, liquid-applied aromatic polyurethane with enhanced bonding characteristics over existing polyurethane coatings, PVC, and TPO membranes.
View ProductsGC
Ultra-Bond
13
Yellow, general purpose, two-component (4:1), water-based epoxy primer with unique penetrating sealant and rust inhibiting properties.
View ProductsGC
Ultra-Bond
55
High-solids, red-oxide alkyd metal primer for steel surfaces that is fast drying, VOC (less than 340 gms./liter), and rust inhibitive.
View ProductsGC
Ultra-Bond
80
Two-component (1:1), liquid-applied, solvent-based epoxy-polyamide primer with enhanced bonding characteristics to ferrous and galvanized metal.
View ProductsGC
Ultra-Bond
80
SC
GC Ultra-Bond 80 SC is a two component, liquid applied, epoxy-polyamine primer with enhanced bonding characteristics as an intercoat. GC Ultra-Bond 80 SC is designed to be in compliance with SCQAMD air quality standards.
View Products