Spray Foam Wall – General Coatings Manufacturing Corp.

Spray Foam Wall

Ultra-Thane Spray Foam Wall products are manufactured in both 2 lb closed cell and 0.5 lb open cell technologies. Our spray foam wall technologies come as HFO, HFC, or water-blown, Class 1 fire rated systems with best-in-class R-value and air sealing performance under Intertek CCRR research reports.

These interior foams insulate studwall cavities, crawlspaces, attics, rim-joist, and cathedral ceilings with AC 377 code compliant air barrier and energy saving performance. Ultra-Thane spray foam wall expands, bonds and seals (gaps & cracks) around traditional framing, structural beams, ductwork, conduit and pipes. Our spray foam wall can be used interior applications in commercial, industrial, and residential properties.

Ultra-Thane closed-cell foam can be sprayed onto the exterior wall panel of commercial buildings forming a uniform layer of continuous insulation and covered with approved cladding material. Ultra- Thane spray foam wall has been tested and approved over several leading industry thermal (NFPA 286) and ignition (Appendix X) barrier coatings.

Ultra-Thane Closed-Cell Spray Foam Wall

  • HFO or HFC 2 lb
  • Superior Yield
  • Best-in-Class R-Value
  • Class 1 Fire rated
  • Easy to apply
  • Class 2 vapor retarder
  • Improves structural integrity

Ultra-Thane Open-Cell Spray Foam Wall

  • Water-blown 0.5 lb
  • Lightweight and Superior Yield
  • Best-in-Class R-Value
  • Class 1 Fire rated
  • Easy to apply
  • Class 3 vapor retarder
  • Sound absorbing
 

Available Products

HFC Spray Foam

Ultra-Thane

202

HFC Wall

Spray foam is a two-component, closed cell, Class 1 fire-rated, spray-in-place, interior, polyurethane foam system with nominal core density 2.0 – 2.2 pcf. Ultra-Thane 202 HFC spray foam uses traditional blowing agent technology that is user-friendly, energy-saving, and cost-effective. HFC foams have a proven record of insulation performance and durability.

View Products
HFO Spray Foam

Ultra-Thane

205

HFO Wall

Spray foam is a two-component, closed cell, Class 1 fire-rated, spray-in-place, interior, polyurethane foam system with nominal core density 2.0 – 2.3 pcf. Ultra-Thane 205 HFO uses next-generation blowing-agent technology that provides climate change respectful, low global warming potential (GWP) performance, with superior per board foot yield. HFO technology spray foams have been adopted and required in many states.

View Products
Open Cell Spray Foam

Ultra-Thane

050

Wall

Water-blown, spray foam is a two-component, Class 1 fire-rated, spray-in-place, interior, polyurethane foam system with nominal core density 0.55 pcf. Ultra-Thane 050 open cell, spray foam is user-friendly for installers, excellent air sealing, and cost-effective insulation.

View Products

Ultra-Thane

050

MAX

Water-blown, spray foam is a two-component, Class 1 fire-rated, spray-in-place, interior, polyurethane foam system with nominal core density 0.45 pcf. Ultra-Thane 050 MAX open cell spray foam with superior per board foot yield and best-in-class R-Value.

View Products

Ultra-Thane

050

OCX

Water-blown, spray foam is a two-component, Class 1 fire-rated, spray-in-place, interior, polyurethane foam system with nominal core density 0.55 pcf. Ultra-Thane 050 OCX open cell, spray foam meets ignition barrier (unoccupied attic space) performance under AC 377 without additional fire coating.

View Products